How To Modify A Car Light For Beginners - Exterior Guide

Source: DHgate, Tag: Car Motorcycle

Want to enhance your vehicle? Find out how to modify a car light and change the way you drive. Check out our essential beginner's guide.

When it comes to car light modification, everyone has their own ideas of what makes a vehicle look good. Although everyone buys the same car, they can make their car different through acquired modification. The car light modification highlighted in this article will make your car different and often look better.
The point is that these modifications are reasonable and legal. For most friends who like light modification, car light modification can completely satisfy you. The desire to modify the car.

Once everyone was a single halogen lamp, now there are xenon lamps, LED lamps, and laser headlights that sound higher. Moreover, there are many types of lights. In addition to the familiar high-beam and low-beam lights, there are also turn signals, brake lights, fog lights, width indicator lights, and so on. Generally speaking, we change the lights, in addition to wanting to make our car unique, the main reason is that the original car lights are not bright enough.
The bulb that comes with the car when it leaves the factory is called the original car halogen bulb. The brightness of the original car halogen bulb is not enough, usually 55W. If it is in the urban area, it is generally enough. If you go on high speeds and run long distances, the requirements are higher. Is not enough. In order to improve brightness, there are generally two methods.
One is to replace high-power bulbs, such as using 100W high-power bulbs, but think about it and know that 100W halogen bulb bulbs consume too much power, one on each side is 200W, each Two words are 400W, which puts a lot of pressure on the car battery and circuit..
Therefore, people now generally use LED headlights to change their lights. LED headlights are deeply loved by car owners because of their bright and power-saving characteristics. Take the "Nine Plus One Car LED Headlight C6" sold directly by Guangzhou Kejie Trading Co., Ltd., the power is 36W, but the brightness is 4 times that of the original car halogen bulb. C6 is also the most popular LED on the market so far. One of the headlights. However, if you want to change the lamp, you must select the corresponding model. If your car is H7, choose H7, and if it’s H4, choose H4. The interfaces of car headlights are all produced according to a unified standard. You can install them as long as the headlights are of the correct model. There are headlight models on the manual and the headlight assembly. If you don’t know, you can just look at it. In addition, you can also check online to find out what model your car is.
Replacing the LED bulbs is very simple. Just remove the original halogen bulbs and replace them with new LED bulbs. The effect will be 30%-50% brighter than the original car lights. It takes a few minutes to save money.
There are several popular styles of car light modification as follows


1. Car headlights
One of our commonly used lights includes low beams and high beams; low beams are usually used on roads with street lights, and high beams are used on roads without lighting; like in urban roads, there are street lights everywhere. For the kind, just use the low beam at night. Turning on the high beam can easily dazzle the other person’s eyes and cause an accident, and the alternate long and low beam lights can communicate with other drivers.

2. Fog lights
Fog lights are mainly used when driving in rainy and foggy weather. Because fog lights have relatively strong penetrating power, don't look at the usual fog lights that are not so bright. Once they encounter heavy fog, their role will come into play. Furthermore, fog lights include front fog lights and rear fog lights. At present, the country has no requirements for front fog lights, so it is a reduction target for many cars. However, the rear fog lamp is mandatory. Also, to correct a common mistake, that is, fog lights should be turned on in rainy and foggy weather, not double flashes!

3. Double flash
I just said that double flashing should not be used in fog and rain, because the double flashing light is the light that should be used when the vehicle is in an emergency, so it is also called the hazard warning light.

4. Turn signal
The function of the turn signal is to warn other vehicles when the car is turning. The response side turn signal must be turned on when turning, changing lanes, overtaking, and turning around.

5. Width indicator
The function of the width indicator light is to display the width and length of the body at night so that the vehicles can judge each other's relative position and the volume of the vehicle when meeting or overtaking. Side edge position.

6. Daytime running lights
The function of the daytime running lights is to alert other vehicles when the driving light is not good during the day. Many people don’t understand the difference between daytime running lights and width indicators. In fact, both of them serve as warnings. One is to highlight the width and height of the body, and the other is to remind others that there is a car here. The difference between the two is, The width indicator lights are on the four corners of the body, but the daytime running lights are only on the front.

7. Taillights
The taillights are installed on the left and right sides of the rear of the car, and the light is white. They are mainly used to alert vehicles or pedestrians behind when driving at night.

8. Brake lights
Brake lights, one of the must-installed car lights, are basically installed behind the car body. When you step on the brake, it will trigger the rear brake light, which serves as a warning to the car behind. The color is red.

9. Reversing lights
Although both the reversing light and the brake light are installed behind the body, the brake light is red and the reversing light is white. Its main function is to illuminate the road behind the car and facilitate the reversing view. It is the same as the brake light. It is not a manual switch, but it can also play a certain warning role.

10. Dashboard lights
Instrument lights are installed on the dashboard of the car and are used for dashboard lighting to facilitate the driver to obtain driving information and operate the vehicle correctly.

11. Interior lights
The car interior lighting is used for the interior lighting when parking and driving at night and the interior lighting will not affect the driver's line of sight, which is very convenient.

12. Ambient lights in the car
The decoration of the ambient light, especially when driving home from getting off work at night, once the ambient light is turned on, the noise outside the car has nothing to do with me. The flickering ambient light and background music are equivalent to giving yourself a comfortable space, very relaxing! The core function of the ambient light is control, lighting effects, scene mode, etc. We mainly install it on the steering wheel, central control, footlight, cup holder, roof, welcome light, welcome pedal, door, etc. of the car, and it is soft after installation The effect created by the light will give people a sense of warmth and comfort at home, and at the same time, it will give people a sense of technology and luxury, which makes people fall into it!
Guangzhou Kejie International Trade Co., Ltd. was established in 2010 and is located in Tianhe District, Guangzhou. It is a professional manufacturer of lamps for automobiles and motorcycles. The company has extensive experience in the automotive leading industry. The main products are car headlights, fog lights, daytime running lights, work lights, turn signals, etc. In addition, efforts are being made to develop new products to meet different requirements.
Want to make your car cool? Hurry up and do it yourself! You can easily realize your desire to modify the car yourself!